Daily Papers Arch&EAI

Achieving high performance, energy efficiency, and cost-effectiveness while maintaining architectural flexibility is a critical challenge in the development and deployment of edge AI devices. Monolithic SoC designs struggle with this complex balance mainly due to low manufacturing yields (below 16%) at advanced 360 mm^2 process nodes. This paper presents a novel chiplet-based RISC-V SoC architecture that addresses these limitations through modular AI acceleration and intelligent system level optimization. Our proposed design integrates 4 different key innovations in a 30mm x 30mm silicon interposer: adaptive cross-chiplet Dynamic Voltage and Frequency Scaling (DVFS); AI-aware Universal Chiplet Interconnect Express (UCIe) protocol extensions featuring streaming flow control units and compression-aware transfers; distributed cryptographic security across heterogeneous chiplets; and intelligent sensor-driven load migration. The proposed architecture integrates a 7nm RISC-V CPU chiplet with dual 5nm AI accelerators (15 TOPS INT8 each), 16GB HBM3 memory stacks, and dedicated power management controllers. Experimental results across industry standard benchmarks like MobileNetV2, ResNet-50 and real-time video processing demonstrate significant performance improvements. The AI-optimized configuration achieves ~14.7% latency reduction, 17.3% throughput improvement, and 16.2% power reduction compared to previous basic chiplet implementations. These improvements collectively translate to a 40.1% efficiency gain corresponding to ~3.5 mJ per MobileNetV2 inference (860 mW/244 images/s), while maintaining sub-5ms real-time capability across all experimented workloads. These performance upgrades demonstrate that modular chiplet designs can achieve near-monolithic computational density while enabling cost efficiency, scalability and upgradeability, crucial for next-generation edge AI device applications.

Achieving high performance, energy efficiency, and cost-effectiveness while maintaining architectural flexibility is a critical challenge in the development and deployment of edge AI devices.

Due to rising electricity demand, accurate short-term load forecasting is increasingly important for grid stability and efficient energy management, particularly in resource-constrained edge settings. We present a hardware-efficient Quantum Reservoir Computing (QRC) framework based on a fixed, untrained quantum circuit with Chebyshev feature encoding, brickwork entanglement, and single- and two-qubit Pauli measurements, avoiding quantum backpropagation entirely. Using the Tetouan City Power Consumption dataset, we examine the effect of post-training fixed-point quantization on the classical readout layer, with the reservoir architecture selected through a genetic search over 18 candidate configurations. Under finite-shot evaluation, 8-bit and 6-bit quantization maintain forecasting accuracy within 1% of the FP32 baseline while reducing readout memory by 75% and 81%, respectively. These results suggest that quantized readout can improve the hardware efficiency and deployment practicality of QRC for memory-constrained energy forecasting.

Due to rising electricity demand, accurate short-term load forecasting is increasingly important for grid stability and efficient energy management, particularly in resource-constrained edge settings.

End-to-end autonomous driving has evolved from the conventional paradigm based on sparse perception into vision-language-action (VLA) models, which focus on learning language descriptions as an auxiliary task to facilitate planning. In this paper, we propose an alternative Vision-Geometry-Action (VGA) paradigm that advocates dense 3D geometry as the critical cue for autonomous driving. As vehicles operate in a 3D world, we think dense 3D geometry provides the most comprehensive information for decision-making. However, most existing geometry reconstruction methods (e.g., DVGT) rely on computationally expensive batch processing of multi-frame inputs and cannot be applied to online planning. To address this, we introduce a streaming Driving Visual Geometry Transformer (DVGT-2), which processes inputs in an online manner and jointly outputs dense geometry and trajectory planning for the current frame. We employ temporal causal attention and cache historical features to support on-the-fly inference. To further enhance efficiency, we propose a sliding-window streaming strategy and use historical caches within a certain interval to avoid repetitive computations. Despite the faster speed, DVGT-2 achieves superior geometry reconstruction performance on various datasets. The same trained DVGT-2 can be directly applied to planning across diverse camera configurations without fine-tuning, including closed-loop NAVSIM and open-loop nuScenes benchmarks.

End-to-end autonomous driving has evolved from the conventional paradigm based on sparse perception into vision-language-action (VLA) models, which focus on learning language descriptions as an auxiliary task to facilitate planning.

The rapid scaling of Large Language Models presents significant challenges for their deployment and inference, particularly on resource-constrained specialized AI hardware accelerators such as Huawei's Ascend NPUs, where weight data transfer has become a critical performance bottleneck. While lossless compression can preserve model accuracy and reduce data volume, existing lossless compression algorithms exhibit extremely low throughput when ported to the Ascend NPU architecture. In this paper, we propose ENEC, a novel lossless compression method specifically customized for AI model weights and optimized for Ascend Neural Processing Units. ENEC adopts a block-based fixed-length encoding scheme and incorporates a series of NPU-specific optimizations: bit-width quantization with hierarchical halving bit-packing, vectorized branch-free integer transformation, and dependency-decoupled intra-segment scan for efficient prefix-sum computation. Experimental results demonstrate that ENEC outperforms existing state-of-the-art NPU compressors in both compression ratio and throughput. Compared to leading GPU solutions, ENEC achieves a 3.43X higher throughput than DietGPU and a 1.12X better compression ratio than nvCOMP. By reducing weight transmission overhead, ENEC significantly improves end-to-end inference performance, achieving up to a 6.3X speedup. On Ascend NPUs, ENEC is the first open-source lossless compression algorithm for model weights that achieves performance comparable to state-of-the-art GPU compressors, offering an effective solution for deploying large-scale AI models.

The rapid scaling of Large Language Models presents significant challenges for their deployment and inference, particularly on resource-constrained specialized AI hardware accelerators such as Huawei's Ascend NPUs, where weight data transfer has become a critical performance bottleneck.

Vision-Language-Action (VLA) models achieve strong generalization in robotic manipulation but remain largely reactive and 2D-centric, making them unreliable in tasks that require precise 3D reasoning. We propose GeoPredict, a geometry-aware VLA framework that augments a continuous-action policy with predictive kinematic and geometric priors. GeoPredict introduces a trajectory-level module that encodes motion history and predicts multi-step 3D keypoint trajectories of robot arms, and a predictive 3D Gaussian geometry module that forecasts workspace geometry with track-guided refinement along future keypoint trajectories. These predictive modules serve exclusively as training-time supervision through depth-based rendering, while inference requires only lightweight additional query tokens without invoking any 3D decoding. Experiments on RoboCasa Human-50, LIBERO, and real-world manipulation tasks show that GeoPredict consistently outperforms strong VLA baselines, especially in geometry-intensive and spatially demanding scenarios.

Vision-Language-Action (VLA) models achieve strong generalization in robotic manipulation but remain largely reactive and 2D-centric, making them unreliable in tasks that require precise 3D reasoning.

Robotic and embodied-AI systems have the potential to improve accessibility and quality of care in clinical settings, but their deployment in close physical contact with vulnerable patients introduces significant safety risks. This paper presents a hazard management methodology for MammoBot, an assistive robotic system designed to support patients during X-ray mammography. To ensure safety from early development stages, we combine stakeholder-guided process modelling with Software Hazard Analysis and Resolution in Design (SHARD) and System-Theoretic Process Analysis (STPA). The robot-assisted workflow is defined collaboratively with clinicians, roboticists, and patient representatives to capture key human-robot interactions. SHARD is applied to identify technical and procedural deviations, while STPA is used to analyse unsafe control actions arising from user interaction. The results show that many hazards arise not from component failures, but from timing mismatches, premature actions, and misinterpretation of system state. These hazards are translated into refined and additional safety requirements that constrain system behaviour and reduce reliance on correct human timing or interpretation alone. The work demonstrates a structured and traceable approach to safety-driven design with potential applicability to assistive robotic systems in clinical environments.

Robotic and embodied-AI systems have the potential to improve accessibility and quality of care in clinical settings, but their deployment in close physical contact with vulnerable patients introduces significant safety risks.

Dexterous robotic manipulation requires more than geometrically valid grasps: it demands physically grounded contact strategies that account for the spatially non-uniform mechanical properties of the object. However, existing grasp planners typically treat the surface as structurally homogeneous, even though contact in a weak region can damage the object despite a geometrically perfect grasp. We present a pipeline for grasp selection and force regulation in a five-fingered robotic hand, based on a map of locally admissible contact loads. From an operator command, the system identifies the target object, reconstructs its 3D geometry using SAM3D, and imports the model into Isaac Sim. A physics-informed geometric analysis then computes a force map that encodes the maximum lateral contact force admissible at each surface location without deformation. Grasp candidates are filtered by geometric validity and task-goal consistency. When multiple candidates are comparable under classical metrics, they are re-ranked using a force-map-aware criterion that favors grasps with contacts in mechanically admissible regions. An impedance controller scales the stiffness of each finger according to the locally admissible force at the contact point, enabling safe and reliable grasp execution. Validation on paper, plastic, and glass cups shows that the proposed approach consistently selects structurally stronger contact regions and keeps grip forces within safe bounds. In this way, the work reframes dexterous manipulation from a purely geometric problem into a physically grounded joint planning problem of grasp selection and grip execution for future humanoid systems.

Dexterous robotic manipulation requires more than geometrically valid grasps: it demands physically grounded contact strategies that account for the spatially non-uniform mechanical properties of the object.

Visual navigation is a core challenge in Embodied AI, requiring autonomous agents to translate high-dimensional sensory observations into continuous, long-horizon action trajectories. While generative policies based on diffusion models and Schrödinger Bridges (SB) effectively capture multimodal action distributions, they require dozens of integration steps due to high-variance stochastic transport, posing a critical barrier for real-time robotic control. We propose Rectified Schrödinger Bridge Matching (RSBM), a framework that exploits a shared velocity-field structure between standard Schrödinger Bridges ($\varepsilon=1$, maximum-entropy transport) and deterministic Optimal Transport ($\varepsilon\to 0$, as in Conditional Flow Matching), controlled by a single entropic regularization parameter $\varepsilon$. We prove two key results: (1) the conditional velocity field's functional form is invariant across the entire $\varepsilon$-spectrum (Velocity Structure Invariance), enabling a single network to serve all regularization strengths; and (2) reducing $\varepsilon$ linearly decreases the conditional velocity variance, enabling more stable coarse-step ODE integration. Anchored to a learned conditional prior that shortens transport distance, RSBM operates at an intermediate $\varepsilon$ that balances multimodal coverage and path straightness. Empirically, while standard bridges require $\geq 10$ steps to converge, RSBM achieves over 94% cosine similarity and 92% success rate in merely 3 integration steps -- without distillation or multi-stage training -- substantially narrowing the gap between high-fidelity generative policies and the low-latency demands of Embodied AI.

Visual navigation is a core challenge in Embodied AI, requiring autonomous agents to translate high-dimensional sensory observations into continuous, long-horizon action trajectories.

Vision-language-action (VLA) models enable robots to follow natural-language instructions grounded in visual observations, but the instruction channel also introduces a critical vulnerability: small textual perturbations can alter downstream robot behavior. Systematic robustness evaluation therefore requires a black-box attacker that can generate minimal yet effective instruction edits across diverse VLA models. To this end, we present SABER, an agent-centric approach for automatically generating instruction-based adversarial attacks on VLA models under bounded edit budgets. SABER uses a GRPO-trained ReAct attacker to generate small, plausible adversarial instruction edits using character-, token-, and prompt-level tools under a bounded edit budget that induces targeted behavioral degradation, including task failure, unnecessarily long execution, and increased constraint violations. On the LIBERO benchmark across six state-of-the-art VLA models, SABER reduces task success by 20.6%, increases action-sequence length by 55%, and raises constraint violations by 33%, while requiring 21.1% fewer tool calls and 54.7% fewer character edits than strong GPT-based baselines. These results show that small, plausible instruction edits are sufficient to substantially degrade robot execution, and that an agentic black-box pipeline offers a practical, scalable, and adaptive approach for red-teaming robotic foundation models. The codebase is publicly available at https://github.com/wuxiyang1996/SABER.

Vision-language-action (VLA) models enable robots to follow natural-language instructions grounded in visual observations, but the instruction channel also introduces a critical vulnerability: small textual perturbations can alter downstream robot behavior.

Vision--Language--Action (VLA) models have emerged as a powerful paradigm for open-world robot manipulation, but their practical deployment is often constrained by \emph{cost}: billion-scale VLM backbones and iterative diffusion/flow-based action heads incur high latency and compute, making real-time control expensive on commodity hardware. We present A1, a fully open-source and transparent VLA framework designed for low-cost, high-throughput inference without sacrificing manipulation success; Our approach leverages pretrained VLMs that provide implicit affordance priors for action generation. We release the full training stack (training code, data/data-processing pipeline, intermediate checkpoints, and evaluation scripts) to enable end-to-end reproducibility. Beyond optimizing the VLM alone, A1 targets the full inference pipeline by introducing a budget-aware adaptive inference scheme that jointly accelerates the backbone and the \emph{action head}. Specifically, we monitor action consistency across intermediate VLM layers to trigger early termination, and propose Inter-Layer Truncated Flow Matching that warm-starts denoising across layers, enabling accurate actions with substantially fewer effective denoising iterations. Across simulation benchmarks (LIBERO, VLABench) and real robots (Franka, AgiBot), A1 achieves state-of-the-art success rates while significantly reducing inference cost (e.g., up to 72% lower per-episode latency for flow-matching inference and up to 76.6% backbone computation reduction with minor performance degradation). On RoboChallenge, A1 achieves an average success rate of 29.00%, outperforming baselines including pi0(28.33%), X-VLA (21.33%), and RDT-1B (15.00%).

Vision--Language--Action (VLA) models have emerged as a powerful paradigm for open-world robot manipulation, but their practical deployment is often constrained by \emph{cost}: billion-scale VLM backbones and iterative diffusion/flow-based action heads incur high latency and compute, making real-time control expensive on commodity hardware.

Vision-Language-Action (VLA) models based on flow matching -- such as pi0, pi0.5, and SmolVLA -- achieve state-of-the-art generalist robotic manipulation, yet their iterative denoising, typically 10 ODE steps, introduces substantial latency: on a modern GPU, denoising alone accounts for 80% of end-to-end inference time. Naively reducing the step count is unreliable, degrading success on most tasks due to the velocity field being uncalibrated for single-step jumps. We present SnapFlow, a plug-and-play self-distillation method that compresses multi-step denoising into a single forward pass (1-NFE) for flow-matching VLAs. SnapFlow mixes standard flow-matching samples with consistency samples whose targets are two-step Euler shortcut velocities computed from the model's own marginal velocity predictions, avoiding the trajectory drift caused by conditional velocities, as we analyze theoretically. A zero-initialized target-time embedding lets the network switch between local velocity estimation and global one-step generation within a single architecture. SnapFlow requires no external teacher, no architecture changes, and trains in ~12h on a single GPU. We validate on two VLA architectures spanning a 6x parameter range, with identical hyperparameters: on pi0.5 (3B) across four LIBERO suites (40 tasks, 400 episodes), SnapFlow achieves 98.75% average success -- matching the 10-step teacher at 97.75% and slightly exceeding it -- with 9.6x denoising speedup and end-to-end latency reduced from 274ms to 83ms; on SmolVLA (500M), it reduces MSE by 8.3% with 3.56x end-to-end acceleration. An action-step sweep on long-horizon tasks reveals that SnapFlow maintains its advantage across execution horizons, achieving 93% at n_act=5 where the baseline reaches only 90%. SnapFlow is orthogonal to layer-distillation and token-pruning approaches, enabling compositional speedups.

Vision-Language-Action (VLA) models based on flow matching -- such as pi0, pi0.5, and SmolVLA -- achieve state-of-the-art generalist robotic manipulation, yet their iterative denoising, typically 10 ODE steps, introduces substantial latency: on a modern GPU, denoising alone accounts for 80% of end-to-end inference time.

This paper addresses the Kidnapped Robot Problem (KRP), a core localization challenge of relocalizing a robot in a known map without prior pose estimate upon localization loss or at SLAM initialization. For this purpose, a passive 2-D global relocalization framework is proposed. It estimates the global pose efficiently and reliably from a single LiDAR scan and an occupancy grid map while the robot remains stationary, thereby enhancing the long-term autonomy of mobile robots. The proposed framework casts global relocalization as a non-convex problem and solves it via the multi-hypothesis scheme with batched multi-stage inference and early termination, balancing completeness and efficiency. The Rapidly-exploring Random Tree (RRT), under traversability constraints, asymptotically covers the reachable space to generate sparse, uniformly distributed feasible positional hypotheses, fundamentally reducing the sampling space. The hypotheses are preliminarily ordered by the proposed Scan Mean Absolute Difference (SMAD), a coarse beam-error level metric that facilitates the early termination by prioritizing high-likelihood candidates. The SMAD computation is optimized for limited scan measurements. The Translation-Affinity Scan-to-Map Alignment Metric (TAM) is proposed for reliable orientation selection at hypothesized positions and accurate final global pose evaluation to mitigate degradation in conventional likelihood-field metrics under translational uncertainty induced by sparse hypotheses, as well as non-panoramic LiDAR scan and environmental changes. Real-world experiments on a resource-constrained mobile robot with non-panoramic LiDAR scans show that the proposed framework achieves competitive performance in success rate, robustness under measurement uncertainty, and computational efficiency.

This paper addresses the Kidnapped Robot Problem (KRP), a core localization challenge of relocalizing a robot in a known map without prior pose estimate upon localization loss or at SLAM initialization.

Transforming complex actions into discrete skill abstractions has demonstrated strong potential for robotic manipulation. Existing approaches mainly leverage latent variable models, e.g., VQ-VAE, to learn skill abstractions through learned vectors (codebooks), while they suffer from codebook collapse and modeling the causal relationship between learned skills. To address these limitations, we present \textbf{S}kill \textbf{T}raining with \textbf{A}ugmented \textbf{R}otation (\textbf{STAR}), a framework that advances both skill learning and composition to complete complex behaviors. Specifically, to prevent codebook collapse, we devise rotation-augmented residual skill quantization (RaRSQ). It encodes relative angles between encoder outputs into the gradient flow by rotation-based gradient mechanism. Points within the same skill code are forced to be either pushed apart or pulled closer together depending on gradient directions. Further, to capture the causal relationship between skills, we present causal skill transformer (CST) which explicitly models dependencies between skill representations through an autoregressive mechanism for coherent action generation. Extensive experiments demonstrate the superiority of STAR on both LIBERO benchmark and realworld tasks, with around 12\% improvement over the baselines.

Transforming complex actions into discrete skill abstractions has demonstrated strong potential for robotic manipulation.

Achieving robot transparency is a critical step toward effective human-robot collaboration. To be transparent, a robot's natural language communication must be consistent with its actions and explicitly grounded in the task and environment. Existing hierarchical Vision-Language-Action (VLA) models can generate language (e.g., through chain-of-thought) and low-level actions. However, current work does not consider explicit alignment between these modalities during training. To address this crucial gap, we propose a novel training framework that explicitly grounds hierarchical VLA sub-task descriptions with respect to the visual observation and action space. Our framework uses a contrastive model to assess the alignment between generated language and corresponding action trajectories. This contrastive model enables direct ranking of different language-trajectory pairs based on their alignment, allowing us to refine the grounding of our hierarchical VLA through offline preference learning. We apply our framework to the LanguageTable dataset, a benchmark dataset of human language-annotated trajectories, and provide critical insights into multimodal grounding representations, all while establishing a strong baseline that achieves performance comparable to fully supervised fine-tuning and minimizing the need for costly data annotations.

Achieving robot transparency is a critical step toward effective human-robot collaboration.

Vision-Language-Action (VLA) models have achieved remarkable success in robotic manipulation. However, their robustness to linguistic nuances remains a critical, under-explored safety concern, posing a significant safety risk to real-world deployment. Red teaming, or identifying environmental scenarios that elicit catastrophic behaviors, is an important step in ensuring the safe deployment of embodied AI agents. Reinforcement learning (RL) has emerged as a promising approach in automated red teaming that aims to uncover these vulnerabilities. However, standard RL-based adversaries often suffer from severe mode collapse due to their reward-maximizing nature, which tends to converge to a narrow set of trivial or repetitive failure patterns, failing to reveal the comprehensive landscape of meaningful risks. To bridge this gap, we propose a novel \textbf{D}iversity-\textbf{A}ware \textbf{E}mbodied \textbf{R}ed \textbf{T}eaming (\textbf{DAERT}) framework, to expose the vulnerabilities of VLAs against linguistic variations. Our design is based on evaluating a uniform policy, which is able to generate a diverse set of challenging instructions while ensuring its attack effectiveness, measured by execution failures in a physical simulator. We conduct extensive experiments across different robotic benchmarks against two state-of-the-art VLAs, including $π_0$ and OpenVLA. Our method consistently discovers a wider range of more effective adversarial instructions that reduce the average task success rate from 93.33\% to 5.85\%, demonstrating a scalable approach to stress-testing VLA agents and exposing critical safety blind spots before real-world deployment.

Vision-Language-Action (VLA) models have achieved remarkable success in robotic manipulation.

Reinforcement learning (RL) has emerged as a critical paradigm for post-training Vision-Language-Action (VLA) models, enabling embodied agents to adapt and improve through environmental interaction. However, existing RL frameworks for VLAs inherit synchronous design principles from traditional LLM training, treating entire rollouts as indivisible units and alternating strictly between data collection and policy optimization. This fundamentally mismatches the unique characteristics of VLA training, as physical simulators introduce highly variable, resource-intensive latencies. To address this, we introduce RL-VLA$^3$, a fully asynchronous distributed RL framework that enables fine-grained asynchronous interaction between simulation, inference, and training components through dynamic batching schedulers and flexible environment sharding strategies. Extensive experiments across diverse simulation backends, VLA architectures, and RL algorithms demonstrate that RL-VLA$^3$ achieves throughput improvements of up to 85.2\% over synchronous baselines while maintaining identical sample efficiency, with scalability validated from 8 to 256 GPUs. To our knowledge, RL-VLA$^3$ is the first fully asynchronous RL training framework tailored specifically for the system-level challenges of VLA training.

Reinforcement learning (RL) has emerged as a critical paradigm for post-training Vision-Language-Action (VLA) models, enabling embodied agents to adapt and improve through environmental interaction.

This paper proposes a novel approach to address the challenge that pretrained VLA models often fail to effectively improve performance and reduce adaptation costs during standard supervised finetuning (SFT). Some advanced finetuning methods with auxiliary training objectives can improve performance and reduce the number of convergence steps. However, they typically incur significant computational overhead due to the additional losses from auxiliary tasks. To simultaneously achieve the enhanced capabilities of auxiliary training with the simplicity of standard SFT, we decouple the two objectives of auxiliary task training within the parameter space, namely, enhancing general capabilities and fitting task-specific action distributions. To deliver this goal, we only need to train the model to converge on a small-scale task set using two distinct training strategies. The difference between the resulting model parameters can then be interpreted as capability vectors provided by auxiliary tasks. These vectors are then merged with pretrained parameters to form a capability-enhanced meta model. Moreover, when standard SFT is augmented with a lightweight orthogonal regularization loss, the merged model attains performance comparable to auxiliary finetuned baselines with reduced computational overhead. Experimental results demonstrate that this approach is highly effective across diverse robot tasks. Project page: https://chris1220313648.github.io/Fast-dVLA/

This paper proposes a novel approach to address the challenge that pretrained VLA models often fail to effectively improve performance and reduce adaptation costs during standard supervised finetuning (SFT).

Vision--Language--Action (VLA) models that encode actions using a discrete tokenization scheme are increasingly adopted for robotic manipulation, but existing decoding paradigms remain fundamentally limited. Whether actions are decoded sequentially by autoregressive VLAs or in parallel by discrete diffusion VLAs, once a token is generated, it is typically fixed and cannot be revised in subsequent iterations, so early token errors cannot be effectively corrected later. We propose DFM-VLA, a discrete flow matching VLA for iterative refinement of action tokens. DFM-VLA~models a token-level probability velocity field that dynamically updates the full action sequence across refinement iterations. We investigate two ways to construct the velocity field: an auxiliary velocity-head formulation and an action-embedding-guided formulation. Our framework further adopts a two-stage decoding strategy with an iterative refinement stage followed by deterministic validation for stable convergence. Extensive experiments on CALVIN, LIBERO, and real-world manipulation tasks show that DFM-VLA consistently outperforms strong autoregressive, discrete diffusion, and continuous diffusion baselines in manipulation performance while retaining high inference efficiency. In particular, DFM-VLA achieves an average success length of 4.44 on CALVIN and an average success rate of 95.7\% on LIBERO, highlighting the value of action refinement via discrete flow matching for robotic manipulation. Our project is available https://chris1220313648.github.io/DFM-VLA/

Vision--Language--Action (VLA) models that encode actions using a discrete tokenization scheme are increasingly adopted for robotic manipulation, but existing decoding paradigms remain fundamentally limited.

This paper addresses a fundamental problem of visuomotor policy learning for robotic manipulation: how to enhance robustness in out-of-distribution execution errors or dynamically re-routing trajectories, where the model relies solely on the original expert demonstrations for training. We introduce the Referring-Aware Visuomotor Policy (ReV), a closed-loop framework that can adapt to unforeseen circumstances by instantly incorporating sparse referring points provided by a human or a high-level reasoning planner. Specifically, ReV leverages the coupled diffusion heads to preserve standard task execution patterns while seamlessly integrating sparse referring via a trajectory-steering strategy. Upon receiving a specific referring point, the global diffusion head firstly generates a sequence of globally consistent yet temporally sparse action anchors, while identifies the precise temporal position for the referring point within this sequence. Subsequently, the local diffusion head adaptively interpolates adjacent anchors based on the current temporal position for specific tasks. This closed-loop process repeats at every execution step, enabling real-time trajectory replanning in response to dynamic changes in the scene. In practice, rather than relying on elaborate annotations, ReV is trained only by applying targeted perturbations to expert demonstrations. Without any additional data or fine-tuning scheme, ReV achieve higher success rates across challenging simulated and real-world tasks.

This paper addresses a fundamental problem of visuomotor policy learning for robotic manipulation: how to enhance robustness in out-of-distribution execution errors or dynamically re-routing trajectories, where the model relies solely on the original expert demonstrations for training.

Multi-agent embodied systems hold promise for complex collaborative manipulation, yet face critical challenges in spatial coordination, temporal reasoning, and shared workspace awareness. Inspired by human collaboration where cognitive planning occurs separately from physical execution, we introduce the concept of compositional environment -- a synergistic integration of real-world and simulation components that enables multiple robotic agents to perceive intentions and operate within a unified decision-making space. Building on this concept, we present CoEnv, a framework that leverages simulation for safe strategy exploration while ensuring reliable real-world deployment. CoEnv operates through three stages: real-to-sim scene reconstruction that digitizes physical workspaces, VLM-driven action synthesis supporting both real-time planning with high-level interfaces and iterative planning with code-based trajectory generation, and validated sim-to-real transfer with collision detection for safe deployment. Extensive experiments on challenging multi-arm manipulation benchmarks demonstrate CoEnv's effectiveness in achieving high task success rates and execution efficiency, establishing a new paradigm for multi-agent embodied AI.

Multi-agent embodied systems hold promise for complex collaborative manipulation, yet face critical challenges in spatial coordination, temporal reasoning, and shared workspace awareness.

This paper presents a novel and scalable screw-theoretic multibody synthesis framework for PDE-based dynamic modeling of serial robotic manipulators with an arbitrary number of flexible links in three-dimensional space. The proposed approach systematically constructs screw-theoretic PDE models for individual flexible links and rigorously enforces holonomic joint constraints through interaction forces. The dynamics of each link are formulated using a set of dual screws expressed in body-fixed coordinates: one describing the motion of the body-fixed frame relative to the inertial frame, a second relating the body-fixed frame to the undeformed configuration, and a third capturing elastic deformations. By expressing the system energy and applying variational principles, the governing dynamics of each link had been previously derived in a unified manner. Synthesizing the individual link models yields an infinitely scalable multibody representation capable of capturing both local (subsystem-level) and global (system-level) dynamics. The framework explicitly recovers all dynamic states, including the motion of each body-fixed frame and the distributed deformation fields of the flexible links. For computational tractability and mathematical rigor, the resulting governing equations are formulated as a semi-explicit index-1 differential-algebraic system. Furthermore, by applying separation of variables, the PDE model is recast as an abstract Cauchy problem, and well-posedness of the resulting system is established.

This paper presents a novel and scalable screw-theoretic multibody synthesis framework for PDE-based dynamic modeling of serial robotic manipulators with an arbitrary number of flexible links in three-dimensional space.

Vision-Language-Action models have recently emerged as a powerful paradigm for general-purpose robot learning, enabling agents to map visual observations and natural-language instructions into executable robotic actions. Though popular, they are primarily trained via supervised fine-tuning or training-time reinforcement learning, requiring explicit fine-tuning phases, human interventions, or controlled data collection. Consequently, existing methods remain unsuitable for challenging simulated- or physical-world deployments, where robots must respond autonomously and flexibly to evolving environments. To address this limitation, we introduce a Test-Time Reinforcement Learning for VLAs (TT-VLA), a framework that enables on-the-fly policy adaptation during inference. TT-VLA formulates a dense reward mechanism that leverages step-by-step task-progress signals to refine action policies during test time while preserving the SFT/RL-trained priors, making it an effective supplement to current VLA models. Empirical results show that our approach enhances overall adaptability, stability, and task success in dynamic, previously unseen scenarios under simulated and real-world settings. We believe TT-VLA offers a principled step toward self-improving, deployment-ready VLAs.

Vision-Language-Action models have recently emerged as a powerful paradigm for general-purpose robot learning, enabling agents to map visual observations and natural-language instructions into executable robotic actions.

Vision-Language-Action (VLA) models integrate visual perception, language understanding, and action decision-making for cross-modal semantic alignment, exhibiting broad application potential. However, the joint processing of high-dimensional visual features, complex linguistic inputs, and continuous action sequences incurs significant computational overhead and low inference efficiency, thereby hindering real-time deployment and reliability. To address this issue, we use image entropy to quantify the grayscale distribution characteristics of each visual token and introduce attention entropy to capture the distribution of attention scores over task-related text. Visual entropy identifies texture-rich or structurally informative regions, while attention entropy pinpoints semantically relevant tokens. Combined with timestep information, these metrics enable a dynamic transition strategy that shifts the model's focus from global visual features to attention-guided local informative regions. Thus, the resulting VLA-InfoEntropy method integrates spatial, semantic, and temporal cues to reduce redundancy while preserving critical content. Extensive experiments show that our method reduces inference parameters, accelerates inference speed, and outperforms existing approaches.

Vision-Language-Action (VLA) models integrate visual perception, language understanding, and action decision-making for cross-modal semantic alignment, exhibiting broad application potential.

Vision-language-action (VLA) models unify perception, language, and control for embodied agents but face significant challenges in practical deployment due to rapidly increasing compute and memory demands, especially as models scale to longer horizons and larger backbones. To address these bottlenecks, we introduce QuantVLA, a training-free post-training quantization (PTQ) framework that, to our knowledge, is the first PTQ approach for VLA systems and the first to successfully quantize a diffusion transformer (DiT) action head. QuantVLA incorporates three scale-calibrated components: (1) a selective quantization layout that integerizes all linear layers in both the language backbone and the DiT while keeping attention projections in floating point to preserve the original operator schedule; (2) attention temperature matching, a lightweight per-head scaling mechanism that stabilizes attention logits and is folded into the dequantization scales at inference; and (3) output head balancing, a per-layer residual interface calibration that mitigates post-projection energy drift. The framework requires no additional training, uses only a small unlabeled calibration buffer, and supports integer kernels for low-bit weights and activations while leaving the architecture unchanged. Across representative VLA models on LIBERO, QuantVLA exceeds the task success rates of full-precision baselines, achieves about 70% relative memory savings on the quantized components, providing a practical pathway toward scalable low-bit embodied intelligence under strict compute, memory, and power constraints.

Vision-language-action (VLA) models unify perception, language, and control for embodied agents but face significant challenges in practical deployment due to rapidly increasing compute and memory demands, especially as models scale to longer horizons and larger backbones.

Evaluation of robotic manipulation systems has largely relied on fixed benchmarks authored by a small number of experts, where task instances, constraints, and success criteria are predefined and difficult to extend. This paradigm limits who can shape evaluation and obscures how policies respond to user-authored variations in task intent, constraints, and notions of success. We argue that evaluating modern manipulation policies requires reframing evaluation as a language-driven process over structured physical domains. We present RoboPlayground, a framework that enables users to author executable manipulation tasks using natural language within a structured physical domain. Natural language instructions are compiled into reproducible task specifications with explicit asset definitions, initialization distributions, and success predicates. Each instruction defines a structured family of related tasks, enabling controlled semantic and behavioral variation while preserving executability and comparability. We instantiate RoboPlayground in a structured block manipulation domain and evaluate it along three axes. A user study shows that the language-driven interface is easier to use and imposes lower cognitive workload than programming-based and code-assist baselines. Evaluating learned policies on language-defined task families reveals generalization failures that are not apparent under fixed benchmark evaluations. Finally, we show that task diversity scales with contributor diversity rather than task count alone, enabling evaluation spaces to grow continuously through crowd-authored contributions. Project Page: https://roboplayground.github.io

Evaluation of robotic manipulation systems has largely relied on fixed benchmarks authored by a small number of experts, where task instances, constraints, and success criteria are predefined and difficult to extend.

Ongoing semiconductor scaling challenges and the rise of neuromorphic computing have sparked interest in exploring novel computing schemes to achieve higher power efficiency and computational capabilities. Probabilistic computing is one candidate that endows low power consumption, capability of solving probability-encoded computational problems, and the ease of integration with existing CMOS technology. A basic building block of this scheme is the probabilistic bit (P-Bit), which utilizes a novel device such as a stochastic magnetic tunnel junction (sMTJ) to generate tunable randomness by nature. This work presents the first experimental demonstration of a fully CMOS-integrated sMTJ-based P-Bit, capable of generating rail-to-rail stochastic output with a mere collection of 3 transistors + 1 sMTJ. Furthermore, simulations also confirm this P-Bit's functionality in probabilistic logic circuits. The demonstration of such P-Bit paves the way towards realizing monolithic large-scale probabilistic computing architecture on CMOS chips.

Ongoing semiconductor scaling challenges and the rise of neuromorphic computing have sparked interest in exploring novel computing schemes to achieve higher power efficiency and computational capabilities.

Four-wheel Independent Steering (4WIS) vehicles have attracted increasing attention for their superior maneuverability. Human drivers typically choose to cross or drive over the low-profile obstacles (e.g., plastic bags) to efficiently navigate through narrow spaces, while existing planners neglect obstacle attributes, leading to suboptimal efficiency or planning failures. To address this issue, we propose a novel multimodal trajectory planning framework that employs a neural network for scene perception, combines 4WIS hybrid A* search to generate a warm start, and utilizes an optimal control problem (OCP) for trajectory optimization. Specifically, a multimodal perception network fusing visual information and vehicle states is employed to capture semantic and contextual scene understanding, enabling the planner to adapt the strategy according to scene complexity (hard or easy task). For hard tasks, guided points are introduced to decompose complex tasks into local subtasks, improving the search efficiency. The multiple steering modes of 4WIS vehicles, Ackermann, diagonal, and zero-turn, are also incorporated as kinematically feasible motion primitives. Moreover, a hierarchical obstacle handling strategy, which categorizes obstacles as "non-traversable", "crossable", and "drive-over", is incorporated into the node expansion process, explicitly linking obstacle attributes to planning actions to enable efficient decisions. Furthermore, to address dynamic obstacles with motion uncertainty, we introduce a probabilistic risk field model, constructing risk-aware driving corridors that serve as linear collision constraints in OCP. Experimental results demonstrate the proposed framework's effectiveness in generating safe, efficient, and smooth trajectories for 4WIS vehicles, especially in constrained environments.

Four-wheel Independent Steering (4WIS) vehicles have attracted increasing attention for their superior maneuverability.

Artificial intelligence applications in autonomous driving, medical diagnostics, and financial systems increasingly demand machine learning models that can provide robust uncertainty quantification, interpretability, and noise resilience. Bayesian decision trees (BDTs) are attractive for these tasks because they combine probabilistic reasoning, interpretable decision-making, and robustness to noise. However, existing hardware implementations of BDTs based on CPUs and GPUs are limited by memory bottlenecks and irregular processing patterns, while multi-platform solutions exploiting analog content-addressable memory (ACAM) and Gaussian random number generators (GRNGs) introduce integration complexity and energy overheads. Here we report a monolithic FDSOI-FeFET hardware platform that natively supports both ACAM and GRNG functionalities. The ferroelectric polarization of FeFETs enables compact, energy-efficient multi-bit storage for ACAM, and band-to-band tunneling in the gate-to-drain overlap region and subsequent hole storage in the floating body provides a high-quality entropy source for GRNG. System-level evaluations demonstrate that the proposed architecture provides robust uncertainty estimation, interpretability, and noise tolerance with high energy efficiency. Under both dataset noise and device variations, it achieves over 40% higher classification accuracy on MNIST compared to conventional decision trees. Moreover, it delivers more than two orders of magnitude speedup over CPU and GPU baselines and over four orders of magnitude improvement in energy efficiency, making it a scalable solution for deploying BDTs in resource-constrained and safety-critical environments.

Artificial intelligence applications in autonomous driving, medical diagnostics, and financial systems increasingly demand machine learning models that can provide robust uncertainty quantification, interpretability, and noise resilience.

Agentic Artificial Intelligence (AI) constitutes a transformative paradigm in the evolution of intelligent agents and decision-support systems, redefining smart environments by enhancing operational efficiency, optimizing resource allocation, and strengthening systemic resilience. This paper presents UserCentrix, a hybrid agentic orchestration framework for smart spaces that optimizes resource management and enhances user experience through urgency-aware and intent-driven decision-making mechanisms. The framework integrates interactive modules equipped with agentic behavior and autonomous decision-making capabilities to dynamically balance latency, accuracy, and computational cost. User intent functions as a governing control signal that prioritizes decisions, regulates task execution and resource allocation, and guides the adaptation of decision-making strategies to balance trade-offs between speed and accuracy. Experimental results demonstrate that the framework autonomously enables efficient intent processing and real-time monitoring, while balancing reasoning quality and computational efficiency, particularly under resource-constrained edge conditions.

Agentic Artificial Intelligence (AI) constitutes a transformative paradigm in the evolution of intelligent agents and decision-support systems, redefining smart environments by enhancing operational efficiency, optimizing resource allocation, and strengthening systemic resilience.

Multi-channel sensor networks in industrial IoT often exceed available bandwidth. We propose PCA-Triage, a streaming algorithm that converts incremental PCA loadings into proportional per-channel sampling rates under a bandwidth budget. PCA-Triage runs in O(wdk) time with zero trainable parameters (0.67 ms per decision). We evaluate on 7 benchmarks (8--82 channels) against 9 baselines. PCA-Triage is the best unsupervised method on 3 of 6 datasets at 50% bandwidth, winning 5 of 6 against every baseline with large effect sizes (r = 0.71--0.91). On TEP, it achieves F1 = 0.961 +/- 0.001 -- within 0.1% of full-data performance -- while maintaining F1 > 0.90 at 30% budget. Targeted extensions push F1 to 0.970. The algorithm is robust to packet loss and sensor noise (3.7--4.8% degradation under combined worst-case).

Multi-channel sensor networks in industrial IoT often exceed available bandwidth.